Instruction manual

76
• Set the desired channel with the rotary selection knob
➪ photo on the WMU (Wireless Main Unit).
• Using the selection knob on the LDB (Lens Data Box),
the FEM-2 or the UMC set the same channel as on the
WMU.
Note: Alternatively both antennas (WMU and receiver)
can be srewed off and connected with the cable
WC-A3 (15m, other lengths on request)
(K2.52263.0) mounted to the antenna sockets.
Operation
selection of radio channel
antenna
threaded bushing
selection of
radio channel
WMU-1
WMU-2
selection of
radio channel
WMU-3UMC-3