Instruction manual

80
UMC-1 UMC-3
READY-LED
5.1.3 Operating the WMU-1, WMU-2,
WMU-3 (Wireless Main Unit)
The following description applies for all Wireless Main Units
– the differences in operation are specifically explained in
the respective sections.
5.1.3.1 Switching on
• Before switching on, ensure that
- the desired radio manual control units
are attached
and correctly configured,
- the same radio channel is programmed on the WMU
and the LDB, FEM-2, UMC-3 or URM,
- the support rods are securely fastened to the camera
- the motor units are securely fastened to the support rods
- the motor drive gear engages the lens gear ring
with as little play as possible.
• Switch the main switch on the universal motor controller
UMC ➪ photo or the camera main switch on the
ARRICAM or ARRIFLEX 435 Xtrem/Advanced to ON.
Operation
main switch
main switch
WMU-1 /WMU-2