Instruction manual

84
5.1.3.2 Resuming operation
after an extended break
If a lens ring was moved manually while the LCS was
switched off, the stored values for the lens end stops will
no longer be correct. So:
• switch on the LCS and recalibrate.
5.1.3.3 Battery Control (BAT)
When the battery control LED (BAT) ➪ photo on the
WMU flashes, the battery must be replaced.
Do not begin any new scenes!
WBU-1 and WBU-2
The operating time of a battery is approx. 5 hours.
Meaning of the BAT LED signals on the WMU-1 and
WMU-2:
illuminated red WMU-1 / WMU-2 will work for approx. 15 min
flashing red WMU-1 / WMU-2 will work for approx. 5 min
fast flashing red WMU-1 / WMU-2 will switch off in approx. 5 s.
BAT-LED
WMU-1
WMU-2
Operation