Instruction manual

90
• Connect the round plug ➪ photo on the power supply
to the WAC-1 (Wireless Accumulator Charger).
• Insert the WBU-1/WBU-2 to be charged with its wide
black pin facing the surface and push into the holder
until the battery clicks in audibly.
• Connect the power supply to the mains. The LED on
the power supply ➪ photo is illuminated red.
• The WBU-1/WBU-2 is fully charged when the power
supply LED flashes ➪ photo red.
• Push away the locking lever ➪ photo from the
battery and pull the fully charged battery backwards
to remove it.
charger
plug
LED
locking lever
Operation