Instruction manual

WFU-1 / WFU-3

WZU-1 WZU-3

5.1.4 Operating the WZU-1 / WZU-3

(Wireless Zoom Unit)

5.1.4.1 Mounting the WZU on the WMU

WZU-1 and WZU-3 are fully compatible in their func-

tions. While the WRC-1 is ergonomically optimal suited

for the WMU-1 / WMU-2, the WZU-3 is optimised for

the WMU-3. Both WZUs can be used with all WMUs.

• Switch off the WMU with the ON key.

• To detach another unit if attached, press the RELEASE-

button ➪ photo, swing away the other unit and pull

up to remove it.

• Insert the WZU with its wide black pin ➪ photo facing

into the free space on the WMU, then press the WZU

onto the WMU until the module clicks in audibly.

Note: Do not separate the manual control units from

each other while switched on, as this could lead

to functional errors, e. g. unintentional alteration

of lens end stops.

Operation

RELEASE-button

pin pin