User's Manual

Wireless

(supported models)

When you click the

Wireless link in the links bar, the menu expands.

Wireless Configuration

When you click the Base Settings link, the Wireless Base Settings page appears.

◆ The wireless function is automatically enabled by default. If you uncheck the Enabled checkbox, the wireless

options are disabled, and the Gateway will not provide or broadcast its wireless LAN services.

◆ The pull-down menu allows you to select and lock the Gateway into the wireless transmission mode you want:

For compatibility with clients using 802.11b (up to 11 Mbps transmission), 802.11g (up to 20+ Mbps), 802.11a

(up to 54 Mbit/s using the 5 GHz band), or 802.11n (from 54 Mbit/s to 600 Mbit/s with the use of four spatial

streams at a channel width of 40 MHz), select B/G/N. To limit your wireless LAN to one mode or the other,

select G-only

, N-only, A-only, or B-only, or some combination that applies to your setup.

B/G B-only

G-only B/G/N

N-only A/N

A-only