User's Manual

Administrator’s Handbook
56
SHELL Commands
Common Commands
arp nnn.nnn.nnn.nnn
Sends an Address Resolution Protocol (ARP) request to match the nnn.nnn.nnn.nnn IP address to an
Ethernet hardware address.
clear [ yes ]
Clears the configuration settings in a Motorola Netopia® Gateway. You are prompted to confirm the clear com-
mand by entering yes.
clear_certificate
Removes an SSL certificate that has been installed.
configure
Puts the command line interface into Configure mode, which lets you configure your Motorola Netopia® Gateway
with Config commands. Config commands are described starting on
page 67.
download [ server_address ] [ filename ] [ confirm ]
This command installs a file of configuration parameters into the Motorola Netopia
®
Gateway from a TFTP (Trivial
File Transfer Protocol) server. The TFTP server must be accessible on your Ethernet network.
You can include one or more of the following arguments with the download command. If you omit arguments, the
console prompts you for this information.
◆ The server_address argument identifies the IP address of the TFTP server from which you want to copy
the Motorola Netopia® Gateway configuration file.
◆ The filename argument identifies the path and name of the configuration file on the TFTP server.
◆ If you include the optional confirm keyword, the download begins as soon as all information is entered.
You can also download an SSL certificate file from a trusted Certification Authority (CA), on platforms that support
SSL, as follows:
download [-cert] [server_address ] [filename] [confirm]
install [ server_address ] [ filename ] [ confirm ]
Downloads a new version of the Motorola Netopia® Gateway operating software from a TFTP (Trivial File Transfer
Protocol) server, validates the software image, and programs the image into the Motorola Netopia® Gateway
memory. After you install new operating software, you must restart the Motorola Netopia® Gateway.
The server_address argument identifies the IP address of the TFTP server on which your Motorola Neto-
pia® Gateway operating software is stored. The
filename argument identifies the path and name of the operat-
ing software file on the TFTP server.
If you include the optional keyword
confirm , you will not be prompted to confirm whether or not you want to per-
form the operation.