User Manual
Table Of Contents
- Touchstone® DG860P2 Data Gateway User’s Guide
- Export Regulations
- Safety Requirements
- Getting Started
- Installing and Connecting Your Data Gateway
- Configuring Your Ethernet Connection
- Using the Data Gateway
- Troubleshooting
- Glossary
3 Choose Automatic from the Location drop-down menu, and Built-in Eth-
ernet from the Show menu.
4 Choose the TCP/IP tab, if necessary.
If you are using TCP/IPv4, go to step 5.
If your cable provider requires TCP/IPv6, go to step 8.
5 Choose Using DHCP from the Configure IPv4 menu.
6 If necessary, click the Renew DHCP Lease button.
7 Close the System Properties application.
TCP/IPv4 configuration is completed.
Touchstone DG860P2 Data Gateway User’s Guide
Safety
Getting
Started Installation
Ethernet
Configuration Usage Troubleshooting Glossary
34