User Manual

B
2 • Product Overview 8
LED Flashing On
6 WIRELESS
Green: Wi-Fi enabled with
encrypted wireless data
activity. Long/short flash
indicates mobile pairing in
progress.
Amber: Wi-Fi enabled with
unencrypted wireless data
activity.
Green: Wireless pairing success-fully
established between the SBG941
and another Wi-Fi enabled device on
your network — printer, PDA, laptop,
etc.
Amber: Mobile pairing was
successful. LED turns green after five
minutes.
7 WPS START
Not applicable — LED does
not flash
Green: WPS button is pressed and
Wi-Fi Protected Security is activated.
LED will remain on until WPS button is
released.
Rear Panel Overview
Both the SBG941 and SBG941U (shown above) rear panels contain the following cabling
port and connectors:
Item Description
1 ETHERNET
1 2 3 4
Ethernet-ports:
Activity LED — Green LED defines the activity of the Ethernet connector
• LED is ON — Indicates a 100Base-T negotiated data rate
• LED is FLASHING — Indicates activity is detected on the port
• LED is OFF — Indicates the unit is not powered or there is no 100Base-T
Ethernet connection