User Manual

B
Changing the SBG941 Default Password
1. In the Password Change Username field, type your new user name.
2. In the New Password field, type your new password (this field is case-sensitive).
3. In the Re-Enter New Password field, type your new password again (this field is
case-sensitive).
4. In the Current Username Password field, type your old password.
5. Select Yes if you want to reset the user name and password to the original factory
settings.
6. Click Apply to update the user name password.
Note: You must login with the default user name, admin, and
password, motorola, after applying the restore factory settings change.
Status Diagnostics Page
This page provides the following diagnostic tools for troubleshooting IP connectivity
problems:
• Ping (LAN)
• Traceroute (WAN)
Ping Utility
Ping (Packet InterNet Groper) allows you to check connectivity between the SBG941 and
other devices on the SBG941 LAN. This utility sends a small packet of data and then
waits for a reply. When you Ping a computer IP address and receive a reply, it confirms
that the computer is connected to the SBG941.
5 • Status Pages 25