User Manual

Basic DHCP Page

This page allows you to configure and view the status of the optional internal SBG941

DHCP (Dynamic Host Configuration Protocol) server for the LAN.

CAUTION: Do not modify these settings unless you are an experienced

network administrator with strong knowledge of IP addressing,

subnetting, and DHCP.

Field Descriptions for the Basic DHCP Page

Field Description

DHCP Server

Select Yes to enable the SBG941 DHCP Server.

Select No to disable the SBG941 DHCP Server.

Starting Local Address

Enter the starting IP address to be assigned by the SBG941

DHCP server to clients in dotted-decimal format. The default is

192.168.0.2.

Number of CPEs

Sets the number of clients for the SBG941 DHCP server to

assign a private IP address. There are 245 possible client

addresses. The default is

245.

Lease Time

Sets the time in seconds that the SBG941 DHCP server leases

an IP address to a client. The default is 3600 seconds (60

minutes).

DHCP Clients

Lists DHCP client device information.

6 • Basic Pages 30