User's Manual
Table Of Contents
- ARRIS Copyrights and Trademarks
- Patent Notice
- Safety Requirements
- Product Overview
- Installing the Wi-Fi Router
- Setting up an Internet Connection
- Setting Up a Wireless Network Connection
- Adding G.hn Extenders To Your Network
- Managing Your Wi-Fi Router and Connected Networks
- Start the Wi-Fi Router Web Manager
- Wi-Fi Router Web Manager Menu Options
- Get Help
- View the Wi-Fi Router Product Information
- Test Your Connection
- Set Up DHCP
- Set Up Dynamic DNS
- View Your IPv6 Configuration
- View Your USB Configuration and Status Information
- Disable LEDs on the Back Panel
- Back Up Your Wi-Fi Router Configuration
- Restore Your Configuration Settings
- Reset Your Configuration Settings
- Update Your Wi-Fi Router Firmware
- Exit the SBR-AC1200P Web Manager
- Protecting & Monitoring Your Wireless Network
- Prevent Unauthorized Access
- Change the Default User Name and Password
- Set Up Firewall Protection
- Set Up Remote Configuration Management
- Filter Devices Based on IP Address
- Filter Devices Based on IP
- Filter Devices Based on IP
- Restrict Wireless Access
- Prioritize Network Traffic Based on Media Type
- Configure Wireless Media Settings
- Set Up Parental Controls
- Set Up Port Triggers
- Set Up Port Forwarding
- Set Up the DMZ Host
Chapter 5: Setting Up a Wireless Network Connection
Release 33 ISSUE 1.3 December 2015 SURFboard SBRAC1200P Wi-Fi Router User Guide
Copyright ARRIS Enterprises, Inc. 2015. All Rights Reserved. 28
11. Click Next to start the Wi-Fi Security mode. WPA2-PSK (the default security code) is
automatically set, and the network settings are displayed.
12. Click Apply to accept or Previous to change the configuration.
Register Your SBR-AC1200P
After you complete the Quick Start Wizard, the Web Manager prompts you to register your
SBR-AC1200P.
1. Click Register now to register your SBR-AC1200P now.
Note: If you do not want to register your SBR-AC1200P right now, you can click Ask me
later. The Web Manager will prompt you to register the next time you log into the
Web Manager.
If you do not want the Web Manager to prompt you to register again, click Stop
asking.
If you decide to register later, or if you need to update your registration, you can click
Status from the configuration screen and select Product Information from the drop-
down menu.
2. Follow the instructions on screen to register your SBR-AC1200P.