User's Manual
Table Of Contents
- ARRIS Copyrights and Trademarks
- Patent Notice
- Safety Requirements
- Product Overview
- Installing the Wi-Fi Router
- Setting up an Internet Connection
- Setting Up a Wireless Network Connection
- Adding G.hn Extenders To Your Network
- Managing Your Wi-Fi Router and Connected Networks
- Start the Wi-Fi Router Web Manager
- Wi-Fi Router Web Manager Menu Options
- Get Help
- View the Wi-Fi Router Product Information
- Test Your Connection
- Set Up DHCP
- Set Up Dynamic DNS
- View Your IPv6 Configuration
- View Your USB Configuration and Status Information
- Disable LEDs on the Back Panel
- Back Up Your Wi-Fi Router Configuration
- Restore Your Configuration Settings
- Reset Your Configuration Settings
- Update Your Wi-Fi Router Firmware
- Exit the SBR-AC1200P Web Manager
- Protecting & Monitoring Your Wireless Network
- Prevent Unauthorized Access
- Change the Default User Name and Password
- Set Up Firewall Protection
- Set Up Remote Configuration Management
- Filter Devices Based on IP Address
- Filter Devices Based on IP
- Filter Devices Based on IP
- Restrict Wireless Access
- Prioritize Network Traffic Based on Media Type
- Configure Wireless Media Settings
- Set Up Parental Controls
- Set Up Port Triggers
- Set Up Port Forwarding
- Set Up the DMZ Host
Release 33 ISSUE 1.3 December 2015 SURFboard SBRAC1200P Wi-Fi Router User Guide
Copyright ARRIS Enterprises, Inc. 2015. All Rights Reserved. 33
Chapter 7
Managing Your Wi-Fi Router and Connected
Networks
Use the SBR-AC1200P Web Manager to view and monitor the configuration settings and
operational status of your Wi-Fi Router. You can also configure your network connections and
wireless security settings. See Protecting & Monitoring Your Wireless Network (page 45) for
more information.
Start the Wi-Fi Router Web Manager
Note: You must use the default user name and password (listed below) to log in to the
SBR-AC1200P Web Manager for the first time. For network security purposes, we highly
recommend that you change the default user name and password after logging onto the
SBR-AC1200P for the first time. See Change the Default User Name and Password for more
information.
1. Open any web browser on the computer connected to the SBR-AC1200P.
2. In the Address bar, type http://192.168.0.1 for the IP address, and then press Enter. The
Login screen appears.
3. Type the default user name and password. Both entries are case-sensitive.
Username: admin
Password: password
4. Click Login to open the SBR-AC1200P Web Manager. The SBR-AC1200P Main Screen
appears.