User's Manual
Table Of Contents
- ARRIS Copyrights and Trademarks
- Patent Notice
- Safety Requirements
- Product Overview
- Installing the Wi-Fi Router
- Setting up an Internet Connection
- Setting Up a Wireless Network Connection
- Adding G.hn Extenders To Your Network
- Managing Your Wi-Fi Router and Connected Networks
- Start the Wi-Fi Router Web Manager
- Wi-Fi Router Web Manager Menu Options
- Get Help
- View the Wi-Fi Router Product Information
- Test Your Connection
- Set Up DHCP
- Set Up Dynamic DNS
- View Your IPv6 Configuration
- View Your USB Configuration and Status Information
- Disable LEDs on the Back Panel
- Back Up Your Wi-Fi Router Configuration
- Restore Your Configuration Settings
- Reset Your Configuration Settings
- Update Your Wi-Fi Router Firmware
- Exit the SBR-AC1200P Web Manager
- Protecting & Monitoring Your Wireless Network
- Prevent Unauthorized Access
- Change the Default User Name and Password
- Set Up Firewall Protection
- Set Up Remote Configuration Management
- Filter Devices Based on IP Address
- Filter Devices Based on IP
- Filter Devices Based on IP
- Restrict Wireless Access
- Prioritize Network Traffic Based on Media Type
- Configure Wireless Media Settings
- Set Up Parental Controls
- Set Up Port Triggers
- Set Up Port Forwarding
- Set Up the DMZ Host
Chapter 7: Managing Your Wi-Fi Router and Connected Networks
Release 33 ISSUE 1.3 December 2015 SURFboard SBRAC1200P Wi-Fi Router User Guide
Copyright ARRIS Enterprises, Inc. 2015. All Rights Reserved. 39
Set Up DHCP
The Basic DHCP screen lets you manually assign IP addresses to devices on your LAN.
To configure your LAN:
1. Click Basic on the SBR-AC1200P Main Menu.
2. Click DHCP from the Basic submenu options.
3. In the LAN Network Configuration section, choose the settings that you would like to apply
to your LAN, and click Apply.
4. In the Reserved IP Client List section, click Add to set up a list of IP addresses that you
want to reserve.
5. In the Attached Client List section, select the IP address of any clients that you want to
reserve, and click Reserve.
6. Click Start Test to begin the test. The results will appear in the box at the bottom of the
screen.
Set Up Dynamic DNS
The Basic DDNS screen uses dynamic DNS to let you give your Wi-Fi Router a "friendly" name,
for example, in case you are setting up a web server in the home. Most users will not need to
set up dynamic DNS.
If you do need to set up dynamic DNS:
1. Click Basic on the SBR-AC1200P Main Menu.