User's Manual
Table Of Contents
- ARRIS Copyrights and Trademarks
- Patent Notice
- Safety Requirements
- Product Overview
- Installing the Wi-Fi Router
- Setting up an Internet Connection
- Setting Up a Wireless Network Connection
- Adding G.hn Extenders To Your Network
- Managing Your Wi-Fi Router and Connected Networks
- Start the Wi-Fi Router Web Manager
- Wi-Fi Router Web Manager Menu Options
- Get Help
- View the Wi-Fi Router Product Information
- Test Your Connection
- Set Up DHCP
- Set Up Dynamic DNS
- View Your IPv6 Configuration
- View Your USB Configuration and Status Information
- Disable LEDs on the Back Panel
- Back Up Your Wi-Fi Router Configuration
- Restore Your Configuration Settings
- Reset Your Configuration Settings
- Update Your Wi-Fi Router Firmware
- Exit the SBR-AC1200P Web Manager
- Protecting & Monitoring Your Wireless Network
- Prevent Unauthorized Access
- Change the Default User Name and Password
- Set Up Firewall Protection
- Set Up Remote Configuration Management
- Filter Devices Based on IP Address
- Filter Devices Based on IP
- Filter Devices Based on IP
- Restrict Wireless Access
- Prioritize Network Traffic Based on Media Type
- Configure Wireless Media Settings
- Set Up Parental Controls
- Set Up Port Triggers
- Set Up Port Forwarding
- Set Up the DMZ Host
Chapter 7: Managing Your Wi-Fi Router and Connected Networks
Release 33 ISSUE 1.3 December 2015 SURFboard SBRAC1200P Wi-Fi Router User Guide
Copyright ARRIS Enterprises, Inc. 2015. All Rights Reserved. 41
2. Click USB Connect from the Basic submenu options.
Disable LEDs on the Back Panel
The Basic LED Control screen lets you disable the LEDs on the back panel of of your Wi-Fi
Router, if you want.
To disable the LEDs on the back panel:
1. Click Basic on the SBR-AC1200P Main Menu.
2. Click LED Control from the Basic submenu options.
3. In the LEDs field, select Disabled.
4. Click Apply.
Back Up Your Wi-Fi Router Configuration
You can save a backup copy of the current configuration settings to your local computer. You
can use the backup file to restore your custom settings in the event that you made changes
that you no longer want.
Caution: We highly recommend that you perform the configuration backup using the
SBR-AC1200P default login username and password.
To create a back up copy of your configuration settings:
1. Click Basic on the SBR-AC1200P Main Menu.
2. Click Backup and Restore from the Basic submenu options.