User's Manual
Table Of Contents
- ARRIS Copyrights and Trademarks
- Patent Notice
- Safety Requirements
- Product Overview
- Installing the Wi-Fi Router
- Setting up an Internet Connection
- Setting Up a Wireless Network Connection
- Adding G.hn Extenders To Your Network
- Managing Your Wi-Fi Router and Connected Networks
- Start the Wi-Fi Router Web Manager
- Wi-Fi Router Web Manager Menu Options
- Get Help
- View the Wi-Fi Router Product Information
- Test Your Connection
- Set Up DHCP
- Set Up Dynamic DNS
- View Your IPv6 Configuration
- View Your USB Configuration and Status Information
- Disable LEDs on the Back Panel
- Back Up Your Wi-Fi Router Configuration
- Restore Your Configuration Settings
- Reset Your Configuration Settings
- Update Your Wi-Fi Router Firmware
- Exit the SBR-AC1200P Web Manager
- Protecting & Monitoring Your Wireless Network
- Prevent Unauthorized Access
- Change the Default User Name and Password
- Set Up Firewall Protection
- Set Up Remote Configuration Management
- Filter Devices Based on IP Address
- Filter Devices Based on IP
- Filter Devices Based on IP
- Restrict Wireless Access
- Prioritize Network Traffic Based on Media Type
- Configure Wireless Media Settings
- Set Up Parental Controls
- Set Up Port Triggers
- Set Up Port Forwarding
- Set Up the DMZ Host
Chapter 8: Protecting & Monitoring Your Wireless Network
Release 33 ISSUE 1.3 December 2015 SURFboard SBRAC1200P Wi-Fi Router User Guide
Copyright ARRIS Enterprises, Inc. 2015. All Rights Reserved. 46
6. Confirm that Change Username is displayed in the drop-down selection box.
7. Complete each field entry, but note the following:
• All fields (for example, Current Username & Current Password) are case-sensitive.
Note: The first time that you log in, the Current Username is admin and the Current
Password is password.
• Make sure No is selected under Restore Factory Defaults.
Figure 2: Change User Name Screen
8. Click Apply to update your user name.