User's Manual
Table Of Contents
- ARRIS Copyrights and Trademarks
- Patent Notice
- Safety Requirements
- Product Overview
- Installing the Wi-Fi Router
- Setting up an Internet Connection
- Setting Up a Wireless Network Connection
- Adding G.hn Extenders To Your Network
- Managing Your Wi-Fi Router and Connected Networks
- Start the Wi-Fi Router Web Manager
- Wi-Fi Router Web Manager Menu Options
- Get Help
- View the Wi-Fi Router Product Information
- Test Your Connection
- Set Up DHCP
- Set Up Dynamic DNS
- View Your IPv6 Configuration
- View Your USB Configuration and Status Information
- Disable LEDs on the Back Panel
- Back Up Your Wi-Fi Router Configuration
- Restore Your Configuration Settings
- Reset Your Configuration Settings
- Update Your Wi-Fi Router Firmware
- Exit the SBR-AC1200P Web Manager
- Protecting & Monitoring Your Wireless Network
- Prevent Unauthorized Access
- Change the Default User Name and Password
- Set Up Firewall Protection
- Set Up Remote Configuration Management
- Filter Devices Based on IP Address
- Filter Devices Based on IP
- Filter Devices Based on IP
- Restrict Wireless Access
- Prioritize Network Traffic Based on Media Type
- Configure Wireless Media Settings
- Set Up Parental Controls
- Set Up Port Triggers
- Set Up Port Forwarding
- Set Up the DMZ Host
Chapter 8: Protecting & Monitoring Your Wireless Network
Release 33 ISSUE 1.3 December 2015 SURFboard SBRAC1200P Wi-Fi Router User Guide
Copyright ARRIS Enterprises, Inc. 2015. All Rights Reserved. 52
Prioritize Network Traffic Based on Media Type
Wi-Fi Multimedia (WMM) allows you to prioritize network traffic based on its media type. You
can configure the quality of service (QoS) parameters for WMM.
To configure your quality of service parameters:
1. Click Wireless on the SBR-AC1200P Main Menu.
2. Click Quality of Service from the Wireless submenu options.
3. Choose your configuration settings, and click Apply.
Configure Wireless Media Settings
1. Click Wireless on the SBR-AC1200P Main Menu.
2. Click Media from the Wireless submenu options.
3. Select the tab for the band whose settings you want to configure.
4. Choose your configuration settings, and click Apply.
Set Up Parental Controls
You can set up the following Parental Controls on your home network:
Allow or block access to specific Internet sites.
Allow or block access to specific MAC addresses.
Set time limitations for computer usage or Internet access.
Note: Any Parental Control filters that do not include assigned ports will apply to all ports. This
also applies to MAC addresses as well.
You can also link each user on yoru network to specified rules for login, time-access, and
content filtering. See Parental Control for more information.