User's Manual
Table Of Contents
- Patent Notice
- Overview
- Safety Requirements
- Getting Started
- Installing and Connecting your Telephony Gateway
- Configuring Your Ethernet Connection
- Using the Telephony Gateway
- Troubleshooting
- The Telephony Gateway is plugged in, but the Power light is Off
- I'm not getting on the Internet (all connections)
- I'm not getting on the Internet (Ethernet)
- I'm not getting on the Internet (Wireless)
- My wireless Internet connection stops working sometimes
- I can get on the Internet, but everything is slow
- I don't have a dial tone when I pick up the phone - why?
- Glossary
DRAFT
Chapter 4: Installing and Connecting your Telephony Gateway
Release 34 DRAFT 1.6 June 2017 Touchstone TG3452 Telephony Gateway User Guide
© 2017 ARRIS Enterprises LLC. All Rights Reserved. 23
your home network, MoCA filters must be installed on any legacy client devices. Your
service provider will install these filters for you.
2. Insert the plug from the power cord into the Power connector on the back of the
Telephony Gateway (7) and insert the power cord into a convenient AC outlet.
3. Connect one end of the Ethernet cable to any Ethernet port on the back of the
Telephony Gateway, (4) and the other end to the Ethernet port on a computer, hub, or
broadband router.
Note: If you are connecting to a computer, use the Ethernet cable included in the
Telephony Gateway package.
4. Connect one end of the telephone cable to one of the telephone ports on the back of the
Telephony Gateway (2). Connect the other end to the telephone.
Configuring Your Wireless Connection
The TG3452 ships with wireless LAN security set by default. See the security label on your
product for the factory security settings.