User Manual
Table Of Contents
- Contents
- Section 1:Overview
- Section 2:Installation
- Section 3:Configuration
- Icon Description
- Enabling the Motorola Wireless Configuration Utility
- Connecting to an Existing Wireless Network
- Configuring a New Wireless Network
- Modifying Properties for a Configured Wireless Network
- Performance Enhancement
- Controlling the Radio
- Preferred Networks – Setting up the Connection Order
- Removing a Network from Your Preferred Network List
- Viewing Site Monitor Information
- Viewing Link Status
- Viewing Network Statistics
- Diagnostics
- Viewing Utility and Driver Version Information
- Removing the Wireless Adapter
- Advanced Configuration of the Wireless Network Adapter
- Section 4:Troubleshooting
- Section 5:Glossary
Configuration Section 3
WN825 3-11
Performance Enhancement
This feature applies only to the WN825GP Wireless Notebook Adapter.
When enabled, the wireless data throughput of a WN825GP Wireless Notebook Adapter is
boosted when used exclusively with Performance Enhanced base stations, such as the
WR850GP Wireless Router and/or WA840GP Wireless Access Point.
When the Performance Enhancement feature is enabled, the wireless network can still
support non-Performance Enhanced client devices, including standard 802.11g and/or
802.11b devices. Under these conditions the network steps down to support full backward
compatibility, but the WN825GP will still function normally.
1 Click Start, click Settings, and then click Control Panel.
2 Click System and select the Hardware tab.
3 Click Device Manager.
4 Click Network adapters.
5 Click Motorola Wireless Network Adapter WN825 and select the Advanced tab.
6 To toggle the feature on or off, select Enabled or Disabled from the Value drop down
menu.
7 Click OK to save the changes and exit.