User Manual
Table Of Contents
- Contents
- Section 1:Overview
- Section 2:Installation
- Section 3:Configuration
- Icon Description
- Enabling the Motorola Wireless Configuration Utility
- Connecting to an Existing Wireless Network
- Configuring a New Wireless Network
- Modifying Properties for a Configured Wireless Network
- Performance Enhancement
- Controlling the Radio
- Preferred Networks – Setting up the Connection Order
- Removing a Network from Your Preferred Network List
- Viewing Site Monitor Information
- Viewing Link Status
- Viewing Network Statistics
- Diagnostics
- Viewing Utility and Driver Version Information
- Removing the Wireless Adapter
- Advanced Configuration of the Wireless Network Adapter
- Section 4:Troubleshooting
- Section 5:Glossary
Section 3 Configuration
3-26 WN825
Advanced Configuration of the Wireless Network Adapter
You can configure advanced features from this screen. Primarily you are concerned with
the IBSS Channel Number, Location, and Frame Bursting areas.
1 Click Start, click Settings, and then click Control Panel.
2 Click System and select the Hardware tab.
3 Click Device Manager.
4 Click Network adapters.
5 Click Motorola Wireless Network Adapter WN825 and select the Advanced tab. An
example of the Advanced tab is shown below (your screen may differ slightly):
6 To change the value for any of the listed properties, click the Property.
7 Change the value in the Value box by either clicking the Value arrow and selecting a
new value, or by typing a new value, as appropriate.
The default values for these properties are set for maximum performance.