User's Manual
Table Of Contents
- Front Cover
- Caution/Copyright
- Contents
- Section 1: Overview
- Section 2: Installation
- Section 3:Configuration
- System Tray Icon Description
- Connecting to an Existing Wireless Network
- Configuring a New Wireless Network
- Configuring Properties for an Existing Wireless Network
- Preferred Networks – Setting up the Connection Order
- Removing a Network From Your Preferred Network List
- Viewing Site Monitor Information
- Viewing Link Status
- Viewing Network Statistics
- Activating LEAP
- Viewing Adapter Product Information
- Section 4: Troubleshooting
- Section 5: Glossary
- Back Cover
CONFIGURATION
SECTION 3
SECTION 3, CONFIGURATION 3-5
3 Click Add. The following Wireless Network Properties window is
displayed. If you are running the utility with WPA support, refer to
WPA Security Configuration for New Network section.
4 Enter information for the new wireless network.
Field Description
Network name (SSID) Enter a Network Name (SSID) from 1 to
32 alphanumeric characters. This is the
SSID for a particular wireless access
point.
Data encryption
(WEP enabled)
The security setting encrypts your
wireless transmission. Select if the type
of security encryption algorithm used on
this network is WEP64 or WEP128.
Network
Authentication
(Shared mode)
Select if your access point requires
Authentication. The option selected
here must match the Authentication
type used by the AP.