User's Manual
Table Of Contents
- Front Cover
- Contents
- Section 1:Overview
- Section 2:Installation
- Section 3:Configuration
- Icon Description
- Enabling the Motorola Wireless Configuration Utility
- Connecting to an Existing Wireless Network
- Configuring a New Wireless Network
- Modifying Properties for a Configured Wireless Network
- Controlling the Radio
- Preferred Networks – Setting up the Connection Order
- Removing a Network from Your Preferred Network List
- Viewing Site Monitor Information
- Viewing Link Status
- Viewing Network Statistics
- Diagnostics
- Viewing Utility and Driver Version Information
- Advanced Configuration of the Wireless Network Adapter
- Section 4:Troubleshooting
- Section 5:Glossary
- Back Cover
CONFIGURATION SECTION 3
WPCI810Gv2 3-11
4 The Wireless Network Properties window displays with the
current settings:
5 If the network requires Network Authentication, select the type of
authentication required. WPA and CCX might require further
Authentication options found on the Authentication tab. Match the
setting used by the network.
6 If the network requires Data Encryption, select the type of
encryption required. Match the setting used by the network.
7 If using WPA-PSK, enter the Pass Phrase in the Network key
field.
! In the example above, the network is configured for WPA-
PSK for Authentication and TKIP for Encryption.
8 For additional information about the fields on this window, refer to
Configuring a New Wireless Network
.
9 Click OK to save your changes.