User's Manual
Table Of Contents
B
Cabling the Gateway • Wall Mounting the Gateway
Motorola SURFboard SVG2501 Series Wireless Voice Gateway* • User Guide 10
550885-001-a
Figure 2 – SVG2501U Installation
Wall Mounting the Gateway
If you choose to mount the wireless gateway on a wall, do the following before starting:
• Locate the unit as specified by the local or national codes governing residential or
business cable TV and communications services.
• Follow all local standards for installing a network interface unit/network interface
device (NIU/NID).
• Make sure the AC power plug is disconnected from the wall outlet and all cables are
removed from the back of the gateway before starting the installation.
• Decide if you are mounting the gateway horizontally or vertically.
Make sure you have the following items:
• Wall-mounting template
• Applicabl
e screwdriver: Phillips or flathead
• Two M3.5 (#6) screws with a flat underside and maximum screw head diameter of
9.0 mm to mount the gateway.