Full Product Manual

PN 365-095-30452 x.1 SURFboard SBG7580-AC Wireless Gateway User Guide

Chapter 4

Installing the Gateway

Caution: This product is for indoor use only. Do not route the Ethernet cable(s) outside of the

building. Exposure of the cables to lightning could create a safety hazard and damage the

product.

Connect the SBG7580-AC to Your Computer

Before installing your SBG7580-AC:

 Check with your service provider (or local cable company) to ensure broadband cable

service is available in your area.

To set up a wireless network, you will need a high-speed Internet connection provided by

an Internet service provider.

Note: When contacting your service provider, you may need your gateway

information listed on the gateway label located on the bottom of your SBG7580-AC

(see Gateway Label page 18).

 Choose a location in your home where your computer and gateway are preferably near

existing cable and electrical wall outlets.

For the best Wi-Fi coverage, a central location in your home or building is recommended.

Note: The following installation procedure covers the wired Ethernet connection

process so that you can confirm that the SBG7580-AC was properly installed and can

connect to the Internet.