Full Product Manual

PN 365-095-31279 x.2 SURFboard SVG2482AC Wireless Voice Gateway User Guide

Chapter 4

Installing the Gateway

Caution: This product is for indoor use only. Do not route the Ethernet cable(s) outside of the

building. Exposure of the cables to lightning could create a safety hazard and damage the

product.

Connect the SVG2482AC to Your Client Device

Before installing your SVG2482AC:

 Check with Comcast, your service provider, to ensure that broadband cable service is

available in your area.

To set up a wireless network, you will need a high-speed Internet connection provided by

Comcast.

Note: When contacting Comcast, you may need your gateway information listed on

the gateway label located on the bottom of your SVG2482AC (see Gateway Label

page 15).

 Choose a location in your home where your client device and gateway are preferably near

existing cable and electrical wall outlets.

For the best Wi-Fi coverage in your home, a central location in your home or building is

recommended.

Note: The following installation procedure covers the wired Ethernet connection

process so that you can confirm that the SVG2482AC was properly installed and can

connect to the Internet.