Full Product Manual

PN 365-095-28610 x.3 SURFboard SB6190 Cable Modem User Guide

Chapter 4

Installing the Cable Modem

Caution: This product is for indoor use only. Do not route the Ethernet cable(s) outside of the

building. Exposure of the cables to lightning could create a safety hazard and damage the

product.

Connect the SB6190 to Your Computer

Before installing the SB6190:

 Check with your service provider to ensure broadband cable service is available in your

area.

 Choose a location in your home where your computer and the SB6190 are preferably near

existing cable and electrical wall outlets.

Figure 4: SB6190 Connection Diagram

1. Check that a coaxial cable is already connected to a cable wall outlet or RF splitter (not

included).

2. Connect the other end of the coaxial cable to the Cable connector on the rear of the

SB6190.

Use your hand to tighten the connectors to avoid damaging them.

3. Connect the Ethernet cable to the Ethernet port on the back of the SB6190.

4. Connect the other end of the Ethernet cable to the Ethernet port on your computer.