Installation Instructions

Note: Your Macintosh computer automatically assigns the name "(en1)" to the HomePortal USB port. If

your computer has more than one Ethernet-type network device installed, the USB port may be named

"(en2)" or higher.

Check your connections

With your computer completely started, verify the POWER and LOCAL NETWORK indicator lights on the

front of the HomePortal are green. If they are not, see “Diagnosing connection problems” on page 20. The

BROADBAND LINK indicator light will not turn green until the HomePortal software has been installed and

an Internet connection has been established.

Continue from here to Step 3 “Install the HomePortal Software” on page 13.

8. Verify that Ethernet Adaptor (en1) is selected

in the Show field. If it is not, select it from the

pull-down menu. When the New Port Detected

message displays, click

OK.

9. Click Save to complete your installation.