User's Manual
Table Of Contents
- Remove or Disable Conflicting Applications
- Check Your Computer’s Browser and System Requirements
- Choose a Computer and Connection Type
- Install the DSL Filter
- Ethernet Connection
- Wireless Connection
- USB Connection
- Windows 98/SE/2K/ME/XP
- Macintosh OS 10.1.4/10.1.5/10.2.0 - 10.2.8/10.3.3 - 10.3.8
- Ethernet Connection
- USB Connection
- Wireless Connection
- Ethernet Connection
- USB Connection
Connect the First Computer to the Gateway
8
USB Connection
Figure 3. Gateway Connected Via USB
1.
Connect the provided AC power adapter from the 2Wire gateway’s POWER port to an electrical outlet.
The
POWER light on the front of the gateway should be green.
2. Connect the provided blue USB cable from the gateway’s USB-PC port to the USB port on your computer.
3. Connect the provided gray telephone cable from the gateway’s PHONE LINE port to a telephone jack with
DSL service.
Note: The USB-DEVICE port is reserved for connecting peripheral USB devices, such as digital
cameras or network attached storage. This port is not currently active.