Install Guide
Table Of Contents
- Remove or Disable Conflicting Applications
- Check Your Computer’s Browser and System Requirements
- Choose a Computer and Connection Type
- Install the DSL Filter
- Ethernet Connection
- Wireless Connection
- Non-2Wire Wireless Adapter Configuration
- a. The network name is the word “2WIRE” (in all capital letters), followed by the last three digits of the gateway serial number (for example, 2WIRE110).
- b. The encryption key is a 64-bit hex value, located beneath the bar code on the bottom of the 2Wire gateway. In the example, it is 4119627022.
- c. For Mac OS X users, you may need to enter the “$” character at the beginning of the encryption key (for example, $4119627022).
- Non-2Wire Wireless Adapter Configuration
- USB Connection
- Windows XP/2K/ME/98SE
- Macintosh OS 10.1.4/10.1.5/10.2.0 - 10.2.8/10.3.3 - 10.3.8
- Ethernet Connection
- USB Connection
- Wireless Connection
- Ethernet Connection
- USB Connection
Add Computers to the Network
11
Ethernet Connection
Figure 4. Gateway Connected to Second Computer Via Ethernet
1.
Connect an Ethernet cable from any available LOCAL ETHERNET
1
port on the gateway to your computer’s
Ethernet port.
1. The number of Ethernet ports vary by model (from one to four). If your gateway has four Ethernet ports, you
can connect up to four computers to your network via Ethernet.
DSL
PHONE LINES
POWER
RESET
AC Power
DSL lter
Telephone wall jack
with DSL
First computer
with Ethernet connection
Additional computer
with Ethernet card
DRAFT ONLY
2Wire Confidential