User's Manual
Table Of Contents
- Choose a Computer and Connection Type
- Ethernet Connection
- Wireless Connection
- USB to PC Connection
- Connecting to VDSL via CoAX
- Setting Up IPTV
- Gateway (System) Pages
- Broadband Link Pages
- Home Network Pages
- Firewall Pages
- Accessing the Management and Diagnostic Console
- System Summary Page
- Broadband Link - Summary Page
- Broadband Link - Statistics Page
- Broadband Link - Configuration Page
- Local Network - Status Page
- Local Network - Statistics Page
- Local Network - Device List Page
- Local Network - Wireless Settings Page
- Local Network - Configuration Page
- Enabling Router Behind Router Alert
- Local Network - Address Allocation Page
- Local Network - Configure the MoCA Network Page
- Local Network - MoCA Statistics Page
- Firewall - Settings Page
- Firewall - Detailed Information Page
- Firewall - Advanced Settings Page
- Troubleshooting - DSL Diagnostics Page
- Troubleshooting - Event Log Page
- Troubleshooting - Network Tests Page
- Troubleshooting - Upgrade History Page
- Troubleshooting Resets Page
- Advanced - Syslog Settings Page
- Advanced - Provisioning Info Page
- Advanced - Configure Time Services Page
- Advanced - Configure Services Page
- Advanced - DNS Resolve Page
- Advanced - Link Manager States Page
- Advanced - Detailed Log Page
- Step 1: Enable Public Network Mode
- Step 2: Allocate Public IP Addresses to the LAN Clients
- Step 3: Configure Firewall Rules
- Sample Configuration
- LED overview
Gateway User Interface
24
Configuring Advanced Settings
The Edit Advanced Home Network Settings page displays the current IP settings in use by your system for
your home network, and allows you to configure your home network settings. You should adjust these
settings ONLY if you are very familiar with computer networking technologies.
The Current Settings panel shows the following information:
• Router Address. The IP address used by your gateway on the private home network (the default is
192.168.1.254). The gateway has two IP addresses: a private address that it uses on the home
network, and one that is used on the public broadband connection on the Internet. You can change the
home network IP address by changing the home network IP address range.
• Subnet Mask. The subnet mask is determined by the home network IP address range settings (the
default is 255.255.255.0).
• DHCP Range. The range of IP addresses used by your system (the default is 192.168.1.33 through
192.168.1.250). IP addresses can be either static (permanently assigned) or dynamic (automatic and
temporary).