User's Manual
Table Of Contents
- Choose a Computer and Connection Type
- Ethernet Connection
- Wireless Connection
- USB to PC Connection
- Connecting to VDSL via CoAX
- Setting Up IPTV
- Gateway (System) Pages
- Broadband Link Pages
- Home Network Pages
- Firewall Pages
- Accessing the Management and Diagnostic Console
- System Summary Page
- Broadband Link - Summary Page
- Broadband Link - Statistics Page
- Broadband Link - Configuration Page
- Local Network - Status Page
- Local Network - Statistics Page
- Local Network - Device List Page
- Local Network - Wireless Settings Page
- Local Network - Configuration Page
- Enabling Router Behind Router Alert
- Local Network - Address Allocation Page
- Local Network - Configure the MoCA Network Page
- Local Network - MoCA Statistics Page
- Firewall - Settings Page
- Firewall - Detailed Information Page
- Firewall - Advanced Settings Page
- Troubleshooting - DSL Diagnostics Page
- Troubleshooting - Event Log Page
- Troubleshooting - Network Tests Page
- Troubleshooting - Upgrade History Page
- Troubleshooting Resets Page
- Advanced - Syslog Settings Page
- Advanced - Provisioning Info Page
- Advanced - Configure Time Services Page
- Advanced - Configure Services Page
- Advanced - DNS Resolve Page
- Advanced - Link Manager States Page
- Advanced - Detailed Log Page
- Step 1: Enable Public Network Mode
- Step 2: Allocate Public IP Addresses to the LAN Clients
- Step 3: Configure Firewall Rules
- Sample Configuration
- LED overview
Access the Management and Diagnostic Console
39
Network Name The default setting is the word “2WIRE,” followed by the
last three digits of the 2Wire gateway serial number.
Authentication The authentication method used: Open, Shared, or WPA-
PSK (Wi-Fi Protected Access pre-shared key).
Encryption The encryption method used: WEP or TKIP.
Channel The frequency channel in use. The default channel is 6. If
multiple access devices within the vicinity use the same
channel, you can set a different channel to eliminate poten-
tial interference.
Devices (the information displayed is dependent on the gateway model features)
Ethernet The number of Active and Inactive Ethernet devices on the
network.
Wireless (802.11) The number of Active and Inactive wireless devices on the
network.
HomePNA The number of Active and Inactive HomePNA devices on
the network.
USB Specifies whether a USB device is present (Active) on the
network. If a USB device is not present, the value is
Inactive.
MoCA The number of Active and Inactive MoCA devices on the
network.
Public Network
Router Address Defines a separate network on the home side.
Subnet Mask The subnet mask allocated for public address.
Item Description