User's Manual
Table Of Contents
- Choose a Computer and Connection Type
- Ethernet Connection
- Wireless Connection
- USB to PC Connection
- Connecting to VDSL via CoAX
- Setting Up IPTV
- Gateway (System) Pages
- Broadband Link Pages
- Home Network Pages
- Firewall Pages
- Accessing the Management and Diagnostic Console
- System Summary Page
- Broadband Link - Summary Page
- Broadband Link - Statistics Page
- Broadband Link - Configuration Page
- Local Network - Status Page
- Local Network - Statistics Page
- Local Network - Device List Page
- Local Network - Wireless Settings Page
- Local Network - Configuration Page
- Enabling Router Behind Router Alert
- Local Network - Address Allocation Page
- Local Network - Configure the MoCA Network Page
- Local Network - MoCA Statistics Page
- Firewall - Settings Page
- Firewall - Detailed Information Page
- Firewall - Advanced Settings Page
- Troubleshooting - DSL Diagnostics Page
- Troubleshooting - Event Log Page
- Troubleshooting - Network Tests Page
- Troubleshooting - Upgrade History Page
- Troubleshooting Resets Page
- Advanced - Syslog Settings Page
- Advanced - Provisioning Info Page
- Advanced - Configure Time Services Page
- Advanced - Configure Services Page
- Advanced - DNS Resolve Page
- Advanced - Link Manager States Page
- Advanced - Detailed Log Page
- Step 1: Enable Public Network Mode
- Step 2: Allocate Public IP Addresses to the LAN Clients
- Step 3: Configure Firewall Rules
- Sample Configuration
- LED overview
Access the Management and Diagnostic Console
54
Users can view specific information by selecting which log to view from the pull-down menu and then
clicking the
Filter button. Following are descriptions of the logs.
• Access. Shows the current access log, which registers all significant Content Screening and Internet
Access Control events.
• All. Shows all logs that register a significant event (access, firewall, fw alert, system, and wra).
• Firewall. Shows all detailed firewall events, including Internet Access Control and Firewall Monitor.
•FW Alert. Shows the current Firewall Monitor log, which registers all significant Firewall Monitor-related
events.
• System. Shows the current system log, which registers all significant events within the 2Wire gateway
since it was last restarted.
• WRA. Shows the current Web Remote Access log, which registers all significant Web Remote Access-
related events.
Each log entry includes the severity level, a description of the event, and the actual time that it occurred.
The most recent events display at the bottom of the list.
Events generate an Informational or Warning severity level. Informational indicates events that are
informational only; Warning indicates an unexpected condition that does not affect the 2Wire gateway’s
ability to operate (for example, a network problem or the 2Wire gateway is not configured properly).