User's Manual
Table Of Contents
- Choose a Computer and Connection Type
- Ethernet Connection
- Wireless Connection
- USB to PC Connection
- Connecting to VDSL via CoAX
- Setting Up IPTV
- Gateway (System) Pages
- Broadband Link Pages
- Home Network Pages
- Firewall Pages
- Accessing the Management and Diagnostic Console
- System Summary Page
- Broadband Link - Summary Page
- Broadband Link - Statistics Page
- Broadband Link - Configuration Page
- Local Network - Status Page
- Local Network - Statistics Page
- Local Network - Device List Page
- Local Network - Wireless Settings Page
- Local Network - Configuration Page
- Enabling Router Behind Router Alert
- Local Network - Address Allocation Page
- Local Network - Configure the MoCA Network Page
- Local Network - MoCA Statistics Page
- Firewall - Settings Page
- Firewall - Detailed Information Page
- Firewall - Advanced Settings Page
- Troubleshooting - DSL Diagnostics Page
- Troubleshooting - Event Log Page
- Troubleshooting - Network Tests Page
- Troubleshooting - Upgrade History Page
- Troubleshooting Resets Page
- Advanced - Syslog Settings Page
- Advanced - Provisioning Info Page
- Advanced - Configure Time Services Page
- Advanced - Configure Services Page
- Advanced - DNS Resolve Page
- Advanced - Link Manager States Page
- Advanced - Detailed Log Page
- Step 1: Enable Public Network Mode
- Step 2: Allocate Public IP Addresses to the LAN Clients
- Step 3: Configure Firewall Rules
- Sample Configuration
- LED overview
5
Connect the Computer to the Gateway
Note: Any equipment or devices that must be installed at the NID are outside the scope of this
document.
Choose a Computer and Connection Type
If the customer has ordered IPTV and High Speed Internet, the preferred location for installing the
3700HGV-B is by the first video set top box. In this case, the first PC may or may not be located in the
same room. If the customer ordered High Speed Internet access only, then the 3700HGV-B should be
installed near the first PC. Computers can be connected to the 3700HGV-B via Ethernet, wireless, USB, or
MoCA.
The first computer you connect to the network is used to configure the 3700HGV-B for proper operation. If
the customer has not ordered High Speed Internet, then the technician must use their assigned laptop to
configure the 3700HGV-B.
Choose one of the following methods to connect the first computer to the 3700HGV-B. Save and close all
open programs before you begin connecting the 3700HGV-B.
Connection Type Page
Ethernet page 6
Wireless page 7
USB page 9