User's Guide
Table Of Contents
- Contents
- Presenting the 4011G Gateway
- Installing Your Gateway
- Starting the User Interface
- Configuring the Wireless Network
- Configuring Firewall Settings
- Configuring LAN Devices
- Configuring the Broadband Connection
- Finding Solutions
CHAPTER 3: Starting the User Interface
16 Setting up Your Password
3. Select the Enable Password Protection check box.
Note Make sure to select this check box or your password will not save.
4. Select the password option:
• When Use Default System password is selected, no further action is required,
go to 7.
• When Create or Edit a Custom Password is selected, continue with the next step.
Note The default system password is printed on the bottom of the gateway.
5. Enter a new password having minimum 6 alphanumeric characters in the Enter New
Password field.
Note The password is case-sensitive and prompts an error message if you enter less
than 6 alphanumeric characters.
6. Re-enter the new password in Confirm New Password field.
Note Although optional, it is strongly recommended that you enter a password hint to
remind you if you forget your password.
7. Click Save; a message appears informing you of the status.