User's Guide
Table Of Contents
- Contents
- Presenting the 4011G Gateway
- Installing Your Gateway
- Starting the User Interface
- Configuring the Wireless Network
- Configuring Firewall Settings
- Configuring LAN Devices
- Configuring the Broadband Connection
- Finding Solutions
Overriding Automatic Date and Time Configuration 23
CHAPTER 3: Starting the User Interface
3. Click Date & Time; a page similar to the following opens.
4. Select Manual Configuration to override the automatic time configuration.
5. Enter the desired time and date information in the Set Time and Set Date fields.
6. Select Daylight Savings Time to enable the automatic daylight saving time adjustment, if
applicable.
7. Click Save.