User's Guide
Table Of Contents
- Contents
- Presenting the 4011G Gateway
- Installing Your Gateway
- Starting the User Interface
- Configuring the Wireless Network
- Configuring Firewall Settings
- Configuring LAN Devices
- Configuring the Broadband Connection
- Finding Solutions
CHAPTER 5: Configuring Firewall Settings
34 Hosting Applications
3. Select Applications and Pinholes; a page similar to the following opens.
4. Select the computer that you want to host the application(s).
Note If the computer you want to select is unlisted because it is powered off, you still
can select it as long as it is on the same network and you know its IP address.
Enter the intended IP address, then click Choose.
5. Filter the application list by selecting the category; your selection is displayed in the
Application List panel.
6. Select from the Application List panel the application(s) you want to host.