User's Guide
Table Of Contents
- Contents
- Presenting the 4011G Gateway
- Installing Your Gateway
- Starting the User Interface
- Configuring the Wireless Network
- Configuring Firewall Settings
- Configuring LAN Devices
- Configuring the Broadband Connection
- Finding Solutions
CHAPTER 6: Configuring LAN Devices
46 Adding New Static Routes
Adding New Static Routes
You can create a local network that has broadband network-accessible IP addresses by creating a
route from the Internet to the specified public network. This feature is typically used in conjunction
with broadband service that provides a range of available IP addresses.
Note Add the static routes first if you want to use the public address with your DHCP
configuration.
1. Open a Web browser and enter http://home, http://gateway.2Wire.net, or
http://192.168.1.254 to access the gateway user interface.
2. Click on the Home page; the Broadband Status page opens.