User's Guide
Table Of Contents
- Contents
- Presenting the 4011G Gateway
- Installing Your Gateway
- Starting the User Interface
- Configuring the Wireless Network
- Configuring Firewall Settings
- Configuring LAN Devices
- Configuring the Broadband Connection
- Finding Solutions
CHAPTER 6: Configuring LAN Devices
50 Configuring DHCP
4. Click DHCP; the DHCP Configuration page opens.
5. Select Configure manually if you want to set up a range for the DHCP address IP pool.
6. Enter information in the following fields:
• In the Router Address field, enter the IP address of your gateway used for all
communication on your local devices.
• In the Subnet Mask field, enter the subnet mask used for all communication on your
local devices (the default is 255.255.255.0).
• In the First DHCP Address field, enter the first IP address in the DHCP address pool
that you will be distributing over the private network.
•In the Last DHCP Address field, enter the last IP address in the DHCP address pool
that you will be distributing over the private network.