User's Guide
Table Of Contents
- Contents
- Presenting the 4011G Gateway
- Installing Your Gateway
- Starting the User Interface
- Configuring the Wireless Network
- Configuring Firewall Settings
- Configuring LAN Devices
- Configuring the Broadband Connection
- Finding Solutions
Configuring DSL and ATM Settings 63
CHAPTER 7: Configuring the Broadband Connection
3. Click Link Configuration; a page similar to the following opens.
4. Enter the VPI and VCI you want the gateway to use in connecting to the ISP.
5. Select the encapsulation method from the ATM Encapsulation drop-down list.
• For PPPoE or Bridging, select Bridged LLC or Bridged VC-Mux.
• For PPPoA, select Routed LLC or Routed VC-Mux.
6. Select the ATM/PVC Search check box to enable the PVC search. PVC search enables
the device to automatically detect ISP's VPI/VCI values so that the end user need not
enter VPI/VCI values.
7. Click
Save.