User's Guide
Table Of Contents
- Contents
- Presenting the 4011G Gateway
- Installing Your Gateway
- Starting the User Interface
- Configuring the Wireless Network
- Configuring Firewall Settings
- Configuring LAN Devices
- Configuring the Broadband Connection
- Finding Solutions
CHAPTER 7: Configuring the Broadband Connection
64 Configuring the Connection Type
Configuring the Connection Type
The connection type identifies the method by which the gateway connects to the ISP.
1. Open a Web browser and enter http://home, http://gateway.2Wire.net, or
http://192.168.1.254 to access the gateway user interface.
2. Click on the Home page; the Summary Status page opens.
3. Click Link Configuration; the Link Configuration page opens.
4. Scroll down to the Connection Type pane.
5. Select the connection type from its corresponding drop-down list.
• If you selected the Direct IP, continue with the next step.
• If you selected the PPPoE or PPPoA, continue with the Configuring PPP
Authentication and Settings section to set up your username and password.
6. Select the Enable check box for Auto Wan Address Mode field to automatically select
the WAN interfaces (ADSL/ADSL2/ADSL2+).