User's Guide
Table Of Contents
- Contents
- Presenting the 4011G Gateway
- Installing Your Gateway
- Starting the User Interface
- Configuring the Wireless Network
- Configuring Firewall Settings
- Configuring LAN Devices
- Configuring the Broadband Connection
- Finding Solutions
Configuring PPP Authentication and Settings 65
CHAPTER 7: Configuring the Broadband Connection
7. Click Save.
Configuring PPP Authentication and Settings
The PPPoE or PPPoA connection type requires authentication to be connected.
To configure the PPP authentication settings:
1. Open a Web browser and enter http://home, http://gateway.2Wire.net, or
http://192.168.1.254 to access the gateway user interface.
2. Click on the Home page; the Summary Status page opens.
3. Click Link Configuration; the Link Configuration page opens.
4. Scroll down to the PPP Authentication and Settings pane.