User's Guide
Table Of Contents
- Contents
- Presenting the 4011G Gateway
- Installing Your Gateway
- Starting the User Interface
- Configuring the Wireless Network
- Configuring Firewall Settings
- Configuring LAN Devices
- Configuring the Broadband Connection
- Finding Solutions
Specifying DNS Information Manually 71
CHAPTER 7: Configuring the Broadband Connection
5. Click the Manually specify your DNS information radio button.
6. Enter the following information:
• In the Primary Server field, enter the IP address of the primary DNS server that the
gateway is to use for DNS name resolution.
•In the Secondary Server field, enter the IP address of the secondary DNS server that
the gateway is to use for DNS name resolution.
• In the Domain Name field, enter the specific domain name to be used by the gateway.
7. Click
Save.
Note Skip the following steps if you do not want to manually add the new DNS
information to the resolution table at this time.
8. Add the new DNS information by clicking the DNS Resolution tab on the Link
Configuration page; the Domain Name Server Resolution page opens.