User's Guide
Table Of Contents
- Contents
- Presenting the 4011G Gateway
- Installing Your Gateway
- Starting the User Interface
- Configuring the Wireless Network
- Configuring Firewall Settings
- Configuring LAN Devices
- Configuring the Broadband Connection
- Finding Solutions
Overriding the System MAC Address 73
CHAPTER 7: Configuring the Broadband Connection
Overriding the System MAC Address
By default, the gateway uses its built-in hardware address for identification. You can override the
default MAC address If you are using devices that require a different MAC address.
1. Open a Web browser and enter http://home, http://gateway.2Wire.net, or
http://192.168.1.254 to access the gateway user interface.
2. Click on the Home page; the Summary Status page opens.
3. Click Link Configuration; the Link Configuration page opens.
4. Scroll down to the Broadband IP Network pane.