User's Guide
Table Of Contents
- Contents
- Presenting the 4011G Gateway
- Installing Your Gateway
- Starting the User Interface
- Configuring the Wireless Network
- Configuring Firewall Settings
- Configuring LAN Devices
- Configuring the Broadband Connection
- Finding Solutions
CHAPTER 7: Configuring the Broadband Connection
74 Changing to the Bridging Mode
5. Select the Override the built-in MAC address button.
6. Enter the MAC address in the corresponding field.
7. Click Save.
Changing to the Bridging Mode
By default, the 2Wire Gateway is configured in the routing mode.
Note When routing is disabled, the NAT and the DHCP server are also disabled. Ensure that
the WAN protocol is compatible to bridging mode, that is, switch PPPoE IP through Bridge
LLC or Bridge VC-Mux before you disable routing.
1. Open a Web browser and enter http://home, http://gateway.2Wire.net, or
http://192.168.1.254 to access the gateway user interface.
2. Click on the Home page; the Summary Status page opens.