User's Guide
Table Of Contents
- Contents
- Presenting the 4011G Gateway
- Installing Your Gateway
- Starting the User Interface
- Configuring the Wireless Network
- Configuring Firewall Settings
- Configuring LAN Devices
- Configuring the Broadband Connection
- Finding Solutions
CHAPTER 8: Finding Solutions
90 Resetting the Gateway
4. Click Resets; the following page opens.
5. Click the button you want to clear or reset.
• Clear Device List. The Clear button clears all devices from the Local Network list.
• Reset IP/PPP. The Reset button resets the PPP connection and/or releases and
renews the broadband IP address.
• Reset Broadband. The Reset button re-establishes the broadband link.
• Reset System. The Reboot button allows you to restart the gateway.
• Reset to Factory Default State. The Reset button resets the gateway to an
unprovisioned default state. Doing so will remove all your saved configuration
settings, while resetting them to their respective default factory settings.