User's Manual

Table Of Contents

Connecting IPTV Set-top Box 8

HomePortal® 5011NV/5012NV Intelligent Gateway Installation Guide Installing the HomePortal Intelligent Gateway

Connecting IPTV Set-top Box

The gateway can be configured to use IPTV services through the Local Ethernet port.

To connect the gateway and the set-top box:

1. Connect one end of the Ethernet cable to the Local Ethernet port of the gateway.

2. Connect the cables’s other end to the Ethernet port of the set-top box.

As soon as the gateway recognizes the set-top box, the relevant Ethernet LED turns steady green, and then

starts flickering once the set-top box starts data transfer with the gateway.

Note Refer to the set-top box manufacturer’s instructions for further information.

Figure 10: IPTV Connection over Local Ethernet