User's Manual

8 Chapter 2 Installing the Gateway
Installing a DSL wall filter
To use a DSL filter with a wall-mounted phone, install the DSL filter between the
original wall plate and your wall-mounted phone.
1. Lift the phone from the wall pegs, and disconnect the phone cord from the phone
jack.
2. Connect the phone cord from the back of the DSL filter into the phone jack, and
mount the filter on the wall plate pegs using the keyhole slots.
3. Connect the phone cable to the phone jack located on the front of the mounted
DSL filter.
Note: Note: If you have a DSL modem, you can connect it to the DSL port at the
bottom of the filter.
4. Attach the phone to the mounting pegs on the DSL filter.
To gateway
(optional)