User's Manual

Chapter 2 Setting up the video bridge 7
Setting up the video bridge
Connect the video bridge to your existing gateway. The gateway should be online
before you start this procedure. The video bridge will serve as a 5 GHz wireless
access point.
Connecting the video bridge to the gateway
Use the Ethernet port to connect the video bridge to your existing gateway.
1. Connect one end of the yellow Ethernet cable to an available yellow Ethernet port
on the gateway.
2. Connect the other end of the cable to the Ethernet port on the video bridge.
Note: A 6-foot yellow Ethernet cable is provided with the video bridge. If you need
another cable, use a Cat 5 or Cat 5e Ethernet cable.
Ethernet
Video bridge
(access point)
Gateway