User's Manual

Chapter 1 Introduction 5
Status lights
Use the status lights on the front of the video bridge to determine its current state.
Status light Description
Power • Solid green. The video bridge is on.
• Red. The video bridge may have a fault with its power
supply. Check the power adapter and its connections.
Disconnect and reconnect the power adapter.
Ethernet • Solid green. A device is connected to the Ethernet port.
• Flickering green. There is activity from the device connected
to the Ethernet port. The flickering of the light is
synchronized to data traffic.
Wireless • Solid green. A set-top box or other device is connected to
the video bridge using a wireless connection.
• Flickering green. There is inbound or outbound activity. The
flickering of the light is synchronized to data traffic.
Wireless signal
strength
• Shows the strength of the wireless connection between the
video bridge and wireless devices. If more than one device is
connected, the indicator shows the strength of the device
with the weakest signal.
AP • Solid green. The video bridge is in access point mode.
• Flickering green. There is activity from a connected device.
The flickering of the light is synchronized to data traffic.
WPS • Flashing green. WPS (Wi-Fi Protected Setup) is configuring
the video bridge.