Owner's Manual
Table Of Contents
S33 downstream bonded channels screen
3.
Press F5 to refresh or update the informaon on the screen.
Restart your S33
To restart your S33:
1. Insert the end of a paper clip or other small object with a narrow p into the Reset
opening on the back of your S33.
2. Press and hold the indented Reset buon for three to four seconds only, and then
release.
Warning:
If y
ou press the Reset buon for more than seven seconds, the cable modem
conguraon sengs will be reset to the factory default sengs.
Reset the S33 conguraon sengs
You can reset the factory default conguraon sengs on your S33. This process will delete
the current S33 conguraon sengs and take approximately ve to 30 minutes to
complete. Your network connecon will remain disabled unl aer the S33 conguraon
sengs are restored.
Warning:
Reseng the S33 conguraon sengs to the factory defaults also deletes any
custom cable modem conguraons, including your login password, and other
conguraon sengs. You should rst back up your S33 conguraon les before
reseng your S33.
To reset the cable modem conguraon back to the factory default sengs:
Chapter 6: Monitoring your cable modem and connected network
SURFboard
®
S33 DOCSIS
®
3.1 cable modem S33 User Guide STANDARD Revision x.2 21